Hot Water System Shutdown: How to Manage It Effectively

Explore Now

The article author is making a few great points related to What Would Cause My Electric Water Heater to Stop Working? overall in the article down the page.



Many modern homes make use of an electric hot water heater for their furnace, as a result of its comfort as well as ease of use. However, similar to any other electric devices, issues may arise with its use, all of a sudden. It can be truly aggravating to wake up to a cold shower rather than a hot one or having your bath with water that isn't warm sufficient and even too warm. Whatever the situation may be, hot water heater issues can be rather nerve-racking. The good news is, we've made a list of feasible services to your water heater problems. There are a variety of aspects that could trigger many of these troubles, maybe a concern with the power supply, the electric heating element, or the thermostat. Before doing anything, ensure you shut off the main power supply for security. Whatever the trouble is, getting it repaired need to not present way too much of a concern if you follow these actions:

Inspect Your Power Supply:


As standard as this might seem, it is really required. Without ample power, your water heater will not function. So the first thing to do when your water unexpectedly retires is to verify that it isn't a power trouble. Check if the fuse is burnt out or the breaker tripped. If the breaker is the problem, merely transform it off and on once more. Replace any type of busted or worn-out fuse. Examine the appliance with power after these adjustments to see if it's now working.

Check the Heating Element in the Hot Water Heater:


If it's not a power problem, after that attempt taking a look at your burner if it is still working. Evaluate each of your burner to make sure the issue isn't with any one of them. If any of them is malfunctioning, change that part and then inspect whether the warm water is back on.

Examine Your Thermostat:


If your water heater still isn't functioning or the water appearing isn't hot enough, you might require to examine the temperature settings on your upper thermostat. Make sure the circuit breaker is switched off before doing anything. Open up the accessibility panel and press the red button for temperature reset above the thermostat. This must aid heat the water. Turn the circuit breaker back on as well as inspect if the trouble has actually been resolved.

Call An Expert:


If after replacing all malfunctioning components and also resetting your temperature, the water heater still isn't working, you may need to contact an expert plumber for an expert viewpoint. The trouble with your heating system could be that the cold and hot faucets have actually been switched over or it might be undersized for the quantity of warm water required in your house. Whatever the instance might be, a specialist plumber would certainly aid fix the trouble.

Verdict


Hot water heater issues are not always significant. Much of them result from small problems like a blown fuse or worn-out heating element. Replacing the damaged components need to suffice. However, if you are still not able to address the trouble, give a call to your nearby plumber to find to get it repaired.

8 possible reasons why you have no Hot Water


Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.


Water Leak


Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.



Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.


Gas Heater: Gas Leak


If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.


Gas Heater: Pilot Light Problems


There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.



Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.


Gas Heater: Faulty Thermocouple


The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.


Electric Heater: Breaker Blues


Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.


Electric Heater: Reaching The Limit


If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.


Electric Heater: Heating Element


If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.

https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/


No Hot Water — Water Heater Repair

We hope you enjoyed our section about What Would Cause My Electric Water Heater to Stop Working?. Thank you for taking a few minutes to read our short article. In case you enjoyed reading our blog posting kindly remember to share it. I enjoy reading our article about How to Troubleshoot and Repair an Electric Water Heater.


About

Leave a Reply

Your email address will not be published. Required fields are marked *